A straight bill of lading covers most US truckloads, but master, LTL and order bills each change what your driver signs and what your billing team needs. Here is which BOL fits which load, with a summary table.
Your driver backs into a retail distribution center with a multi-stop load. The shipper handed him one bill of lading on top and four more stapled underneath, one per purchase order. He gets one signature on the top sheet and leaves. Three weeks later, one store claims a short pallet, and nobody at your office can say which of the five documents was signed, by whom, or for how many pieces. The invoice for the whole load sits unpaid. Most of the time a straight bill of lading is all a truckload needs, but master, LTL and order bills each change what the driver signs and what your billing team has to collect. This guide explains each type of bill of lading used in US trucking, who fills it in, and what it means for the carrier. To stop handling these as loose paper, see how eBOL software builds the BOL directly from the load.
If BOL mix-ups are holding up your invoices, a 30-minute demo shows how each load's documents get signed, stored and attached to the invoice automatically.
What every bill of lading does, whatever its type
Before comparing types, it helps to remember what a bill of lading (BOL) is for. The National Motor Freight Traffic Association (NMFTA) describes the BOL as three things at once: the contract between shipper and carrier, the carrier's receipt for the goods, and a document of title.
Federal law makes the document mandatory for interstate carriers. Under the Carmack Amendment, a carrier must issue a receipt or bill of lading for property it receives, and failing to issue one does not reduce the carrier's liability. FMCSA rules at 49 CFR 373.101 list the minimum content: names of the consignor and consignee, origin and destination, number of packages, a description of the freight, and its weight, volume or measurement when the rate depends on it.
Every type below carries that same core. What changes is whether the document can be transferred, how many shipments it covers, and how much rating detail it needs. For a field-by-field walkthrough of a completed form, see our bill of lading example.
Straight bill of lading: the default for US trucking
The straight bill of lading is the one your drivers see on almost every load. NMFTA calls it the most common type for ground truck transport.
What makes a BOL "straight"
A straight bill is non-negotiable. Federal law defines a nonnegotiable bill as one that states the goods are to be delivered to a consignee, a named party, and endorsing it to someone else does not transfer extra rights. The same section requires a common carrier issuing one to mark it "nonnegotiable" or "not negotiable."
In practice, that means:
The freight goes to the consignee named on the BOL, not to whoever holds the paper.
The shipper usually prepares it, often on the carrier's form or a standard template, and the driver signs it at pickup.
The consignee signs at delivery, and that signed copy becomes your proof of delivery.
Short form vs long form
You will also see "short form" straight bills. A short form prints the shipment details on the front and refers to the terms and conditions instead of printing them all on the back. LTL carriers such as ABF publish those uniform bill of lading terms as a separate document. A long form prints the full terms on the reverse.
Those terms matter more than most carriers think. When the NMFTA revised the uniform straight bill of lading terms in 2016, the changes covered which carrier is liable for loss, claim deadlines and how liability limits apply, as Benesch summarized at the time. If your shipper uses its own form, read which terms it points to.
What changes for the carrier
On a straight BOL, the carrier's risk is mostly operational: wrong counts, missing signatures, references that don't match the rate confirmation. Those are the errors that turn into short-paid or held invoices. If you need a clean form for a shipper who doesn't have one, our free tool builds a straight BOL in a couple of minutes.
Order bill of lading: negotiable, and rare on domestic loads
An order bill of lading is the negotiable version. Under the same federal statute, a negotiable bill states that the goods are to be delivered "to the order of" a consignee and does not say on its face that it is non-negotiable. Whoever properly holds the endorsed original controls the freight.
Order bills are built for trade finance: a bank or buyer can hold the paper until payment clears. That is common in ocean shipping and much less so in domestic trucking, where shipper and consignee usually already have a payment relationship.
What changes for the carrier
If a load ever arrives with "to the order of" on the BOL, treat it differently from a straight bill. Confirm with the shipper or broker who is entitled to take delivery and what document you need to see before releasing the freight. Don't let a driver hand it over to whoever is waiting at the dock.
Master bill of lading: one document for a consolidated load
A master bill of lading covers a consolidated shipment that also has its own individual bills, usually one per order or per shipper. In US retail freight, this follows the VICS bill of lading format, now maintained by GS1 US. The standard VICS form carries a checkbox for "Master Bill of Lading: with attached underlying Bills of Lading", plus supplement pages with their own BOL numbers, page subtotals and a grand total.
You will see master BOLs when:
A shipper consolidates several purchase orders for the same retailer into one truck.
A 3PL or consolidator combines freight from several shippers going to one destination.
A multi-stop load needs one controlling document with an underlying BOL per stop.
Don't confuse this with the ocean meaning. In international shipping, a "master" bill is issued by the ocean carrier and a "house" bill by the forwarder or NVOCC. Both terms show up in search results, but they describe a different relationship from the trucking master BOL.
What changes for the carrier
A master BOL multiplies the places where counts can go wrong. Practical rules that save disputes:
Check that the grand total on the master matches the sum of the underlying BOLs before the driver leaves the dock.
Get a signature and a piece count for each underlying BOL at each stop, not only on the master.
Keep the master and every underlying BOL together on the load record, because retailers and their AP teams often dispute one PO at a time.
Invoice with the references your customer expects (BOL numbers, PO numbers), so each line can be matched.
This is also where retail chargebacks hit hardest: when a store claims a shortage weeks later, the carrier who can produce the signed underlying BOL for that stop wins the argument.
LTL bill of lading: freight class, NMFC and the carrier's own form
An LTL bill of lading is a straight bill with extra rating detail, because the LTL carrier prices the shipment on class, weight and handling. Most national LTL carriers publish their own straight BOL forms, and they expect the shipper to use them or a VICS form.
The LTL-specific fields to get right:
Handling units and pieces. Pallets, crates or cartons, counted separately from the pieces inside.
Freight class and NMFC item number. The classification that drives the rate. NMFTA's Docket 2025-1 reworked classification, including density-based assignments, and took effect on July 19, 2025. Old class numbers copied from last year's paperwork are a common source of reclassification.
Weight and dimensions. A wrong weight leads to a reweigh and a corrected invoice.
Accessorials. Liftgate, residential, inside delivery or appointment needs belong on the BOL, so they can be billed without an argument.
PRO number. The carrier's tracking number, often applied as a barcode sticker on the BOL.
What changes for the carrier
For an LTL carrier, a wrong class or weight on the BOL means a reclass or reweigh, a corrected invoice and a slower payment. For a truckload carrier hauling a pool or partial shipment, it means checking that the BOL details match what you were tendered. Either way, the BOL feeds the invoice directly.
Other bill of lading types you may hear about
A few more terms come up with customers and brokers:
Through bill of lading. One document covering a shipment across several legs or modes, for example truck to rail, or a domestic move that crosses a border. NMFTA lists it alongside inland and ocean bills.
Inland bill of lading. Covers the domestic leg by road, rail or inland waterway, often before or after an ocean move.
Clean vs claused (foul) bill. A clean BOL has no exceptions. A claused BOL notes a problem at pickup, such as "2 cartons crushed." Writing exceptions down at the dock is your best defense against a later damage claim.
eBOL. Not a separate legal type, but an electronic version of any of the above, with the same fields and electronic signatures. Our electronic bill of lading guide covers how it works and where it is accepted.
Types of bill of lading at a glance
Type | Negotiable? | Typical use | What to watch |
|---|---|---|---|
Straight BOL | No | Most truckload and LTL freight to a named consignee | Counts, signatures, references |
Order BOL | Yes | Trade finance; rare domestically | Who may take delivery |
Master BOL | Usually no | Consolidated retail, multi-PO or multi-stop loads | Totals and a signature per underlying BOL |
LTL BOL | No | Partial shipments rated on class and weight | Class, NMFC item, weight, accessorials |
Through / inland BOL | Depends on terms | Multi-leg or intermodal moves | Which leg the terms cover |
How to pick the right BOL for each load
A simple check your dispatchers can run when a load is booked:
One shipper, one consignee, full truck? A straight bill of lading. Make sure the shipper's references match your rate confirmation.
Several POs or shippers going to one destination? Ask whether the shipper will issue a master BOL with underlying bills, and plan for a signature per underlying BOL.
Partial shipment rated by class? An LTL BOL with class, NMFC item, weight and accessorials filled in before pickup.
"To the order of" anywhere on the document? Stop and confirm delivery instructions in writing before dispatch.
Any visible damage or count difference at pickup? Write the exception on the BOL and take a photo before the driver signs.
The goal is that the billing team never has to guess. Each load should reach the office with the right BOL type, every signature and every reference already attached.
Where Dashdoc fits
Dashdoc is a TMS built around the carrier's load, from order to invoice, and the bill of lading is part of that flow rather than a separate pile of paper:
eBOLs generated from each load. The eBOL is pre-filled from the transport already in the system, so the driver doesn't rewrite shipper, consignee or references. See the eBOL feature page.
Signatures and photos in the driver app. Drivers collect signatures at pickup and delivery in the Dashdoc driver app, with photos, time stamps and location as proof. The app keeps working without a signal and syncs when the phone is back online.
Shipper paperwork captured too. When the shipper hands over its own straight, master or LTL BOL, the driver photographs it in the app and it is attached to the load with the rest of the documents.
Billing starts at delivery. Once delivery is confirmed, the signed documents are already on the load, and the invoice can be built from the load and your tariff grids in Dashdoc invoicing.
One point to be clear about: Dashdoc's eBOL is built into the carrier's own load workflow. It does not support the NMFTA eBOL 2.1 API used for eBOL exchange between LTL networks today.
Want to see a multi-stop load go from signed BOLs to a matched invoice? Book a 30-minute demo and we'll walk through it with your own document flow.
Key takeaways
A straight bill of lading is non-negotiable and covers most US truckload and LTL freight. Get counts, signatures and references right and most disputes disappear.
An order bill is negotiable. It is rare on domestic loads, and it changes who can take delivery.
A master BOL controls a consolidated load with underlying bills. Reconcile totals and collect a signature per underlying BOL.
An LTL BOL adds class, NMFC item, weight and accessorials. Errors there become reclasses, reweighs and corrected invoices.
Whatever the type, the BOL is the start of your invoice. The faster a complete, signed BOL reaches the office, the faster you get paid.
If juggling straight, master and LTL paperwork is what slows down your billing, let's look at it together. Book a demo and see how Dashdoc connects each load's BOLs to the invoice.
FAQ
What is a straight bill of lading?
A straight bill of lading is a non-negotiable BOL that consigns the freight to a named consignee. Under 49 U.S.C. 80103, the carrier delivers to that consignee, and the bill must be marked "nonnegotiable" or "not negotiable." It is the most common BOL in US trucking.
What is the difference between a straight and an order bill of lading?
A straight bill names the consignee and cannot be transferred by endorsement. An order bill is negotiable: the goods are delivered "to the order of" a party, so the holder of the properly endorsed original controls the freight. Order bills are mostly used with trade finance and are rare on domestic truck loads.
What is a master bill of lading in trucking?
In US trucking, a master bill of lading covers a consolidated shipment that also has underlying bills of lading, typically one per purchase order, shipper or stop. The VICS BOL format includes a checkbox for a master BOL with attached underlying bills, and supplement pages that total up to the master.
Who issues the bill of lading, the shipper or the carrier?
Legally, the carrier must issue a receipt or bill of lading for the freight it accepts. In practice, the shipper usually prepares the BOL, often on the carrier's form or a standard template, and the driver signs it at pickup to acknowledge receipt.
What is a short form bill of lading?
A short form bill of lading prints the shipment details on the front and incorporates the terms and conditions by reference, for example to the carrier's published uniform bill of lading terms, instead of printing them on the back. A long form prints the full terms on the document.
)
)
)
)